Led Transformer directly used to meet your requirements of high voltage input source, and it will give you a garage 12 volts of power up to 15W,30W,60W,100W,120W,150W,200W and so on.
This is beneficial for applications where you don't want to use an electrical outlet. If you do have an electrical outlet, consider Ac Adapter instead. It accepts an input voltage from Ac170-250V and Ac 90-130V Ac (50/60Hz). And It is fully sealed with Epoxy glue, covered by Aluminium metal cover, so, it achieves a waterproof rate of Ip66.
Nikon D3100 Price
This Led Transformer ensures a good lighting succeed and a long life time for all 12 volt Led products. We advise that it to be used with our 3528 or 5050 waterproof Led Strips Lights.
How to pick the right amperage for the Led strips? You need to form out the total Watts of your Leds firstly. Suppose you are powering 5 meters of our Led Ribbon Strips which is Smd 5050 Led strips, 12V, 60Led/M, that means: 72W/Reel( 5 meters). So, you may need an transformer which is 72W/12=6A, but, if you pick a 12V, 6A waterproof transformer,it would be at the limit of its capabilities.
The Led strips may not reach their full radiance potential, and the Led transformer may work harder than it should. In this case, it would be best to go with a96W led transformer (72W/0.8=90W ). So, we advise that the transformer should only be used 80% of its capacity, by doing this, the waterproof transformer can be used for a longer time. This narrative is from Led strips manufacturer.
Transformers for Led Strips
No comments:
Post a Comment